And then I also finished up prime Butcher and prime Vladimir for my friend Fluffy Bunny. He's planning on playing Butcher in an event this weekend which means he left my place before I could get good pictures of him. I'll add that up when I get a chance with the light box set up. I didn't do any base work for the Khadoran models as that's up to FB to make sure all his models match. (And I don't have a supply of the flock he uses)
Thursday, December 18, 2014
PP Secret Santa Angel and the Dark Prince
Finished a few models. As mentioned in a previous post I signed up for the Privateer Press Secret Santa. My assigned forum goer had asked for either an Una the Falconer or an Aurora. As Aurora is already an angel, that just begged to be done up for Christmas time.
Saturday, December 6, 2014
Project Stealth Airbrush
So, I live in an apartment with very thin walls. My compressor I use for airbrushing is a 1/2 horse Clarke setup designed for pneumatic tools. If I were to use this beast in the apartment when I'm home at night and want to airbrush, needless to say I would wake up everybody in the building.
So the thought became thus: pick up an air tank and regulator to hook up to the airbrush. Fill the tank up with the compressor either during the day or out in the garage, then just use the stored air for the projects until the pressure is too low.
So the regulator ended up being fairly long, and to get it to attach to the output from the tank itself I had to use a 6" nipple so you could tighten it onto the threads without banging the regulator into the tank itself. Then I added a quick release chuck so I can easily take the airbrush hose on/off. The airbrush hose is threaded onto the moisture trap which then has the other half of the quick release.
I was able to get the 5 gallon tank up to about 82 lbs of pressure using my compressor, and I ended up with the regulator at about 32lbs to get the primer to flow through the siphon feed brush. In hindsight I think this might have been a little high - I think my first tip was clogging and that's why I had the pressure higher to try and get it to flow, when I moved to a bigger tip I probably didn't need the pressure up so high. Even running that high though I still got almost 30 minutes of work done with the setup, priming an entire unit of spearmen, their shields and a handful of random parts that weren't assembled yet. Not perfect, but it's more than I would have gotten done in that amount of time trying to hand brush all of that work.
So the thought became thus: pick up an air tank and regulator to hook up to the airbrush. Fill the tank up with the compressor either during the day or out in the garage, then just use the stored air for the projects until the pressure is too low.
So the regulator ended up being fairly long, and to get it to attach to the output from the tank itself I had to use a 6" nipple so you could tighten it onto the threads without banging the regulator into the tank itself. Then I added a quick release chuck so I can easily take the airbrush hose on/off. The airbrush hose is threaded onto the moisture trap which then has the other half of the quick release.
I was able to get the 5 gallon tank up to about 82 lbs of pressure using my compressor, and I ended up with the regulator at about 32lbs to get the primer to flow through the siphon feed brush. In hindsight I think this might have been a little high - I think my first tip was clogging and that's why I had the pressure higher to try and get it to flow, when I moved to a bigger tip I probably didn't need the pressure up so high. Even running that high though I still got almost 30 minutes of work done with the setup, priming an entire unit of spearmen, their shields and a handful of random parts that weren't assembled yet. Not perfect, but it's more than I would have gotten done in that amount of time trying to hand brush all of that work.
Tuesday, November 25, 2014
Privateer Press Secret Santa WIP
I signed up for the Secret Santa program on the Privateer Press forums.
As they need a w.i.p. before December, posting this up to link to their forums. Obviously not done with her yet, but the green stuffing is almost done.
As they need a w.i.p. before December, posting this up to link to their forums. Obviously not done with her yet, but the green stuffing is almost done.
Saturday, November 22, 2014
Friday, October 10, 2014
Tau for trade
As seen on Bartertown post http://www.bartertown.com/trading/viewtopic.php?f=8&t=243256 I have the following Tau models for trade:
The Fire Warriors and Stealth Suits (most not fully assembled)
Hammerhead Tank (partially assembled)
Crisis, Broadside Suits and an Ethereal
Closeup of the painted Fire Warriors
Thursday, September 25, 2014
Vlad in progress
Working on a model for a friend on commission. I think I like the red, but I'm not sure if I like the brass for the trim. Is it too shiney? Does he look too much like a Khorne supporter? Let me know.
Monday, November 11, 2013
A Season's Worth of Angry Elves
Ok, I've been REALLY bad at getting updates posted. I'll easily admit it.
I've had multiple models painted since Adepticon but none of them have made it up here yet. So here we go with the Angry Elf Fall Update.
We begin with solos. Being able to put more time in individual models make them look a little bit nicer.
Within the new few months we should hopefully be seeing House Shyeel Magisters, Magister solos, Mage Hunter Infiltrators and Eiryss, Mage Hunter Commander showing up. All are in progress and just waiting for the final touches of paint.
I've had multiple models painted since Adepticon but none of them have made it up here yet. So here we go with the Angry Elf Fall Update.
We begin with solos. Being able to put more time in individual models make them look a little bit nicer.
Arcanists

Lady Aiyanna and Master Holt
Ghost Sniper
As Privateer Press calls her "The First Lady of the Retribution"
Eyriss, Mage Hunter of Ios
A Destor Thane on a Motorcycle.
A Motorcycle? That can only mean...
Epic Vyros. And a horse just isn't epic enough.
And how could eVyros be seen in public without his posse?
The Griffons.
(back to front, left to right) Ressa, Rectified, Crobin,
Lugklash, Chross, Raindyn
The Aspis (Aspi? Aspisi?)
Fleshy and Attica
Last but not least we have the largest model I've painted to date. I'm still working on getting a good picture of him by itself, but we have my Hyperion (with a guest appearance by the Mountain King of Galaxy Comics)
Subscribe to:
Posts (Atom)












